Pipe and Roof Duct Supports
Pipe Roller Supports (PRS)
Pate Pipe Roller Supports (PRS) are manufactured to securely attach any size pipe, electric conduit, or refrigerant line to the roof of a commercial building. The Pipe Roller Support mounts onto Pate Equipment Supports (ES) to create a strong, watertight roof connection. A Pipe Roller Support consists of galvanized steel track (Unistrut), fittings, washers, and a painted cast iron roller. The Pipe Roller Support accommodates easy vertical and horizontal adjustment to support pipes and other service lines. Rollers allow pipes to expand and contract freely without affecting the roof membrane. Easy to install, Pate Pipe Roller Supports are available with Pate equipment supports in styles to match roof construction.
Pipe Roller Support Styles:
| Product Group | Description |
|---|---|
| PRS-2 (Submittal PDF) | Straight-sided curbs – most common – lightweight fill or tapered insulation |
| PRS-1 (Submittal PDF) | Canted design – 45-degree bend at base – single ply or rubber/PVC roof |
| PRS-5 (Submittal PDF) | Raised-cant design – 45-degree bend and elevated base – insulated roof deck |
| MPRS-2 (Submittal PDF) | Straight-sided curbs – most common – lightweight fill or tapered insulation |
| MPRS-1 (Submittal PDF) | Canted design – 45-degree bend at base – single ply or rubber/PVC roof |
| MPRS-5 (Submittal PDF) | Raised-cant design – 45-degree bend and elevated base – insulated roof deck |
Duct Support System (DSS)
Pate Roof Duct Support Systems (DSS) securely attach round or rectangular HVAC duct to the roof of a commercial building. The DSS mounts onto Pate Equipment Supports (ES) to create a strong, water-tight roof connection. DSS allows for duct expansion and contraction, as well as horizontal and vertical adjustment. Pate DSS are easy to install and are available with Pate equipment supports in styles to match roof construction.
Roof Duct Support Styles:
| Model # | Description |
|---|---|
| DSS-2 (Submittal PDF) | Straight-sided curbs – most common – lightweight fill or tapered insulation |
| DSS-1 (Submittal PDF) | Canted design – 45-degree bend at base – single ply or rubber/PVC roof |
| DSS-5 (Submittal PDF) | Raised-cant design – 45-degree bend and elevated base – insulated roof deck |
| MDSS-2 (Submittal PDF) | Straight-sided curbs – most common – lightweight fill or tapered insulation |
| MDSS-1 (Submittal PDF) | Canted design – 45-degree bend at base – single ply or rubber/PVC roof |
| MDSS-5 (Submittal PDF) | Raised-cant design – 45-degree bend and elevated base – insulated roof deck |
