always in stock items

• ES-1 equipment supports
  standard construction
  18 ga. galvanized steel, unitized construction with integral base plate, continuous welded corner seams, pressure treated wood nailer, counterflashing with screws. Internally re-inforced to conform with pate load bearing factors.
• ES-2 equipment supports
  standard construction
  18 ga. galvanized steel, unitized construction with integral base plate, continuous welded corner seams, pressure treated wood nailer, counterflashing with
  screws. Internally re-inforced to conform with pate load bearing factors.
• PC-2 roof curbs
  standard construction
  Heavy ga. galvanized steel, unitized, full mitered corners, all seams welded, 1 1/2" thick rigid fiberglass insulation, pressure treated wood nailer strip. All curbs are internally reinforced in larger dimensions.
• PC-2 roof curbs with damper ledge
  standard construction
  Heavy ga. galvanized steel, unitized construction with full mitered corners all seams welded, 1 1/2" thick rigid fiberglass insulation, pressure treated wood nailer strip. All curbs are internally reinforced in larger size dimensions.
• Pipe curb assemblies
  standard construction
  pipe curb assembly shall consist of heavy ga. galvanized steel roof curb, unitized construction, with integral base plate, 1 1/2" insulation and 2 x 2 treated wood nailer. Unit shall be furnished with acrylic clad thermoplastic cover, fastening screws, graduated step boots with stainless steel clamps.
• Pipe hood assemblies
  standard construction
  Heavy ga. aluminum construction. With removable top cover, faceplate and 3 sided body provide easy access to the hood interior. Separate fully welded and insulated aluminum mounting base furnished to isolate hood from galvanized curb. Field insulation of hood interior and caulking of all exposed joints after installation of piping is recommended.
• Pipe seal assemblies
  standard construction
  One piece spun aluminum base with full five inch sloped roof surface flange, graduated step pvc boot and adjustable stainless steel clamps.
• Dektites
  standard construction
  For use on metal roof panels, aluminum, copper, plastic, fiberglass, lead and wood. Flexible aluminum base conforms
  to any panel. -30 to +250 F temperature range. One piece construction will not crack or break. Pleated EPDM cone
  adjusts to any roof pitch. Pipe diameter markings are clearly indicated on the flexible cone in inches and millimeters for
  accurate fitting. Applications include plumbing, heating and air conditioning pipes and vents, electrical service entrances,
  etc.. Effectively flashes and isolates the pipe from building movement created by expansion, contraction and vibration.
  Designed for pipe diameters from 1/4" through 24".