the pacesetter in quality prefab roof products 

the pate company®
pate® 2625 south 21st ave.  ¤   broadview, illinois 60155
equipment supports 708-681-1920

fax 708-681-1961

certified load bearing factors p. o. no.       blklinehor copy.GIF (835 bytes)
customer     blklinehor copy.GIF (835 bytes)
The design values below have been established for standard...pate company...sections on the basis of physical test information.  A minimum bearing width
of 4 inches was used for all concentrated loads and reactions, with a minimum spacing of 2 feet: A factor
of safety of 2 or greater is reflected by the recom-
mended allowable loads.  This information is com-
piled and certified by H. H. Holmes Testing
Laboratories, Inc.  Laboratory No. 4550.0.
blklinehor2 copy.GIF (840 bytes)
project         blklinehor copy.GIF (835 bytes)
blklinehor2 copy.GIF (840 bytes)
location     blklinehor copy.GIF (835 bytes)
blklinehor2 copy.GIF (840 bytes)
architect     blklinehor copy.GIF (835 bytes)
engineer     blklinehor copy.GIF (835 bytes)
18 gauge - 8" above roof line
es-l 3½x8 1.388in.²   6.371in.4 1.46in.³ 1500lbs. 1800lbs. 1500lbs.   480lb/ft
es-2 3½x11 1.275in.² 13.900in.4 2.59in.³ 3100lbs. 3500lbs 3100lbs   900lb/ft
es-5 3½x9½ 1.543in.² 10.955in.4 2.12in.³ 1900lbs. 2300lbs. 1900lbs.   600lb/ft
18 gauge - 12" above roof line
es-l 5½x12 1.962in.² 29.215in.4 3.95in.³ 2600lbs. 3200lbs. 2600lbs.     600lb/ft
es-2 5½x15 1.775in.² 37.800in.4 4.85in.³ 4300lbs. 4100lbs 4100lbs   1300lb/ft
es-5 5½x13½ 2.112in.² 39.143in.4 5.17in.³ 3300lbs. 4000lbs. 3300lbs.     750lb/ft
18 gauge - 16" above roof line
es-l 7½x16 2.474in.² 65.595in.4 6.62in.³ 2100lbs. 2500lbs. 2100lbs.   600lb/ft
es-2 7½x19 2.275in.² 79.930in.4 7.85in.³ 4900lbs. 4000lbs 4000lbs 2500lb/ft
es-5 7½x17½ 2.624in.² 82.540in.4 7.71in.³ 2600lbs. 3200lbs. 2600lbs.   800lb/ft
14 gauge - 8" above roof line
es-l 3½x8 2.163in.²   9.904in.4 2.27in.³ 2600lbs. 3200lbs. 2600lbs. 800lb/ft
es-2 3½x11 1.988in.² 21.550in.4 3.99in.³ 5400lbs. 6100lbs. 5400lbs. 1500lb/ft
es-5 3½x9½ 2.397in.² 17.000in.4 3.30in.³ 3300lbs. 4000lbs. 3300lbs. 1000lb/ft
14 gauge - 12" above roof line
es-l 5½x12 3.063in.² 45.621in.4 6.17in.³ 4500lbs. 5600lbs. 4500lbs. 1000lb/ft
es-2 5½x15 2.768in.² 58.840in.4 7.56in.³ 7500lbs. 7100lbs. 7100lbs. 2000lb/ft
es-5 5½x13½ 3.299in.² 60.192in.4 7.74in.³ 5700lbs. 7000lbs. 5700lbs. 1300lb/ft
14 gauge - 16" above roof line
es-l 7½x16 3.862in.² 102.512in.4 10.34in.³ 3600lbs. 4500lbs. 3600lbs. 1000lb/ft
es-2 7½x19 3.549in.² 123.410in.4 12.10in.³ 8000lbs. 7000lbs. 7000lbs. 3500lb/ft
es-5 7½x17½ 4.096in.² 129.380in.4 12.12in.³ 4500lbs. 5600lbs. 4500lbs. 1300lb/ft
equip2botline2.gif (179 bytes)
* all concentrated loads are based on a minimum bearing surface of 4" by
the width of support.
            © 1981 the pate company
the above data is compiled and based solely on ...the pate company...
design, and the engineered internal reinforcing structurally incorporated
therein.
for your protection from liability it is recommended, when specifying and/or
approving equipment bases, that you receive certified load bearing data from
your supplier. 
 

equipment support & bases

| equipment supports page1 | equipment supports page 2 |
 

other sections of the catalog

| roof curbs & vibration isolation | expansion joints | pipe roller supports | skylights, hatches & smoke vents | pipe curb assemblies | pipe seals & dektites |

 

 

| Home Page | About Us | Ordering Information | Catalog Index | Product Overview | News Releases | Email |

 

This site designed and maintained by
© 1996-2005 NetMark Consulting Inc.
All rights reserved.